Cheat Sheets / Pokemon Crystal

Cheat Sheets · GameShark codes

Pokemon Crystal cheats

To cheat in Pokemon Crystal, use GameShark codes: on a GameShark plugged in with the cartridge, or in an emulator's cheat menu. Crystal moved almost every value Gold and Silver codes write to, so most Gold and Silver codes do something else in Crystal. The codes below are built from Crystal's own memory map; codes that start with 91 write to the Game Boy Color's work RAM bank 1, where Crystal keeps these values.

GameShark code builder

Your code

Your save
Switched off
Tested

Gold and Silver codes write to the wrong places in Crystal: use these, or the Gold and Silver page for those games.

Every code the builder makes, tested

Each family below was built from the game's own memory map (the address is a label in the game's code, never a number copied from a list), switched on in the game in an emulator, used the way a player would, then switched off to see what stays. The codes shown use the builder's starting values.

Any item in your Pack Tested

912093D8 916394D8

Your Pack holds RARE CANDY x99.

It stays when you switch the code off.

In the Items and Balls pockets, pick a slot that already has an item in it: a slot past the last one writes over the pocket's end marker, and the pocket then lists junk after it (tested with a list code that does this). TMs and HMs need no slot: each one has its own count.

Tested in Crystal. What the run read:

  • RARE CANDY x99 in the ITEMS pocket
  • MASTER BALL x99 in the BALLS pocket
  • code off: both stay
Any item in your Pack: the real game screen with the code on
Pokemon Crystal with the code on, in the emulator.

Money Tested

910F4ED8 91424FD8 913F50D8

Your money reads 999999. The game stores it as one number in 3 bytes, at most 999999.

It stays when you switch the code off.

Tested in Crystal. What the run read:

  • money in RAM
  • 999999 on the Trainer Card
  • both badge bytes in RAM
  • code off: money and badges stay
Money: the real game screen with the code on
Pokemon Crystal with the code on, in the emulator.

Any wild Pokemon Tested

919704D2 913243D1

Every wild Pokemon you meet is MEW at level 50.

Wild Pokemon are normal again at the next battle.

Catch it and it is a real MEW (tested with MEW, caught with a Master Ball). Switch the codes off before a trainer battle: the game builds a trainer's Pokemon from the same bytes (from the code; trainer battles were not tested).

Tested in Crystal. What the run read:

  • the wild Pokemon is MEW
  • its level is 50
  • caught, and it is in the party with the codes off
Any wild Pokemon: the real game screen with the code on
Pokemon Crystal with the code on, in the emulator.

Shiny wild Pokemon Tested

91AA0CD2 91AA0DD2

Every wild Pokemon is shiny: its DVs read Attack 10, Defense 10, Speed 10, Special 10, which is the game's own shiny rule.

Wild Pokemon roll their own DVs again at the next battle.

The Attack DV also decides a Pokemon's gender and, with the others, which Unown letter it is. Its stats come from its DVs too, so it is shiny with 10s in Defense, Speed and Special.

Tested in Crystal. What the run read:

  • the wild Pokemon's DVs are the shiny ones
  • caught; the party copy keeps the shiny DVs with the codes off
Shiny wild Pokemon: the real game screen with the code on
Pokemon Crystal with the code on, in the emulator.

Walk through walls Tested

0100FAC2 0100FBC2 0100FCC2 0100FDC2

You walk through trees, walls and onto water: the four codes tell the game the tiles around you are floor.

Walls are back after one more step: the game reads the tiles around you again after every step (tested).

Walking off a map where no route joins it takes you into places the game never drew.

Tested in Crystal. What the run read:

  • code off: a step into the tree is blocked
  • code on: the step goes onto the tree
Walk through walls: the real game screen with the code on
Pokemon Crystal with the code on, in the emulator.

No wild battles Tested

910552D4

No wild Pokemon from walking in grass, caves or water (tested in tall grass). The code holds the game's own wait after a battle (wWildEncounterCooldown) at 5 steps. Trainers still see you.

Wild battles come back at once.

Tested in Crystal. What the run read:

  • no wild battle in 200 steps of tall grass
  • control (no code): wild battles happen in the same grass

Badges Tested

91FF57D8 91FF58D8

The badges you tick are yours, Johto and Kanto: the Trainer Card shows them.

They stay when you switch the code off.

Tested in Crystal. What the run read:

  • money in RAM
  • 999999 on the Trainer Card
  • both badge bytes in RAM
  • code off: money and badges stay
Badges: the real game screen with the code on
Pokemon Crystal with the code on, in the emulator.

Pokedex complete Tested

91FF99DE 91FF9ADE 91FF9BDE ... 64 codes in all (the builder lists them)

All 251 Pokemon seen and caught. 64 codes: one for each byte of the two flag lists.

The flags stay when you switch the codes off, so you can enter them a few at a time if your GameShark holds fewer codes.

Tested in Crystal. What the run read:

  • 251 seen and 251 caught flags while the Pokedex is open (the screen's numbers are in the picture)
  • code off: every caught flag stays
Pokedex complete: the real game screen with the code on
Pokemon Crystal with the code on, in the emulator.

Infinite HP in battle Tested

01003CC6 01643DC6

Your Pokemon's HP in battle is set back to 100 every frame.

HP goes down normally again.

Use your Pokemon's max HP. A bigger number shows over the max and stays after the battle (tested with 255 over a max of 30).

Tested in Crystal. What the run read:

  • HP stays at the max every turn
  • PP of move 2 stays 30 in battle and in the party

Infinite PP Tested

012334C6 9123F6DC

Move 1 keeps 35 PP, in battle and in your first Pokemon's own copy.

PP goes down normally again.

The game takes a PP from two places each turn. A code on the battle copy alone (as most lists print it) lets your Pokemon's own PP run down (tested).

Tested in Crystal. What the run read:

  • HP stays at the max every turn
  • PP of move 2 stays 30 in battle and in the party

Game Corner coins Tested

912755D8 910F56D8

Your coins read 9999. Stored as one number in 2 bytes.

They stay when you switch the code off.

Tested in Crystal. What the run read:

  • coins in RAM (9999 as one number)
  • code off: the coins stay

Codes from other lists, tested

The codes most Pokemon Crystal code lists print, each switched on in the game and checked the same way. The address of every code was looked up in the game's own symbol files, so the verdict says what the code really writes to.

CodeLists call itVerdictWhat the game does
91FF57D891FF58D8All 16 badgesWorks$FF to Crystal's wJohtoBadges and wKantoBadges. The same codes the builder makes.
01FF7CD501FF7DD5All 16 badges (printed for Crystal)Another game's codeThe Gold and Silver addresses. In Crystal the badge bytes stay 00 00.
910F4ED891424FD8913F50D8Max moneyWorks999,999 as one number in wMoney. The same codes the builder makes.
010F4ED801424FD8013F50D8Max money (01 version)WorksThe same bytes with type 01: in our runs every write landed in work RAM bank 1. A 01 code depends on Crystal having bank 1 switched in when the GameShark writes; the 91 version does not.
019973D5019974D5019975D5Max money (printed for Crystal)Another game's codeThe Gold and Silver addresses, in the wrong format for Crystal too. Crystal's money did not change.
9100FAC29100FBC29100FCC29100FDC2Walk through wallsWorkswTileDown to wTileRight set to floor. $C2FA sits outside the banked area, so the 91 makes no difference; the builder writes the same with 01.
010AA3CE010AA4CE010AA5CE010AA6CEWalk through walls (printed for Crystal)Another game's codeGold and Silver's tile addresses. In Crystal $CEA3 is part of the screen's colour map: walls stay walls.
910730D2Shiny wild PokemonWorks, with a catchHolds wBattleType at 7, the Red Gyarados type, which the game always makes shiny (EA AA, tested). It also replaces the type of special battles; only grass battles were tested.
91015DD9Always on the bikeWorksHolds wPlayerState at 1, the bicycle.
91EAF4DC91AAF5DCFirst Pokemon in your party is shinyWorks, with a catchWrites the shiny DVs into your first Pokemon. Its stats are not worked out again until the game recalculates them (a level up, for one), so they stay those of its old DVs until then.
9163D9D899 of the first ballWorksThe quantity of the first slot of the Balls pocket.
910430D2Always meet female PokemonDoes not workIt holds wBattleType at 4, the fishing type. Gender comes from the Attack DV, which this never touches.
91012DD2Catch a trainer's PokemonNot testedNot run (no trainer battle in our runs). It holds wBattleMode at 1, the value for a wild battle.

How a GameShark code works

A Game Boy GameShark code is eight characters, TTVVLLHH. TT is the code type: 01 writes one byte; 9b first switches the Game Boy Color's work RAM to bank b; 8b first switches the cartridge's save RAM bank. VV is the byte it writes. LLHH is the address with its low byte first, so 010138CD writes 01 to address CD38.

The GameShark plugs in between the Game Boy and the cartridge and writes every code's byte again once a frame, about 60 times a second, from the game's VBlank interrupt. It only writes memory; it never changes the cartridge. So a code works when the game reads that byte for the thing you want, and it keeps working only while the game would not change it back. That is why some codes stay when you switch them off (your money really is 999999 now) and others stop at once (wild Pokemon are normal again).

How we tested: the game runs in an emulator with no change to its code, and before every frame our model of the GameShark writes the code's byte, the way the device does. For the codes whose timing could matter, a second emulator whose own GameShark writes at the exact moment the real device does gave the same result.

How to enter the codes

On a real GameShark

The GameShark sits between the Game Boy and the cartridge, and you enter codes on it before the game starts; it holds 10 to 25 codes at once. We did not test a real device.

In RetroArch

  1. Load the game and open the Quick Menu, then Cheats.
  2. Choose Add New Code to Top (or to Bottom), open the new line and pick Code.
  3. Type the code, set Enabled to on, go back one level and choose Apply Changes.

In Delta (iPhone and iPad)

  1. Start the game and open the pause menu, then Cheat Codes.
  2. Tap + and choose GameShark as the cheat device.
  3. Give it a name and type the code.

Other emulators have a cheat menu too; pick GameShark as the code type. These steps come from each emulator's own help pages. Codes with more than one line are entered as one cheat with one code per line, or as separate cheats that are all on.

Before you save

Items, money, coins, badges and Pokedex flags go into your save the next time you save the game, and switching the code off does not take them back. Wild Pokemon, walking through walls and no wild battles are never saved. If you want to be able to go back, copy your save file first (an emulator's save file, or a second save on a real cartridge is not possible: there is one). Caught Pokemon from a code are normal Pokemon and stay in your save.

Codes for glitch Pokemon and glitch items are left out of this page on purpose: they can damage a save in ways the game cannot repair.

Questions people ask

How do you cheat in Pokemon Crystal?

With GameShark codes: on a GameShark plugged in with the cartridge, or in an emulator's cheat menu. Use Crystal codes, not Gold and Silver ones: 912093D8 with 916394D8 puts 99 Rare Candies in the first slot of your Items pocket.

What is the shiny code for Pokemon Crystal?

91AA0CD2 with 91AA0DD2 makes every wild Pokemon shiny, with the game's shiny DVs. 910730D2, from other lists, also works: it sets the battle type the Red Gyarados uses, which the game always makes shiny.

Why do Crystal codes start with 91?

Crystal keeps these values in the Game Boy Color's work RAM bank 1 and switches that window to other banks for its own work. A 91 code writes into bank 1 every time; a 01 code writes into whichever bank is switched in at that moment.

What is the walk through walls code for Pokemon Crystal?

0100FAC2, 0100FBC2, 0100FCC2 and 0100FDC2 together (the 9100FAC2 set other lists print does the same). The 010AA3CE set is the Gold and Silver address and does not work in Crystal.

What is the max money code for Pokemon Crystal?

910F4ED8, 91424FD8 and 913F50D8 give 999999. The 019973D5 set is the Gold and Silver one and changes nothing in Crystal's money.

Will GameShark codes ruin my Crystal save?

Codes for items, money, badges and the Pokedex change your save the next time you save, and switching them off does not undo them. Wild Pokemon, shiny Pokemon and walking through walls are not saved until you catch something. Back up your save first.

How this was checked

Tested in the game's own code in an emulator, English Crystal 1.1, on . Not on a real GameShark or cartridge. Every address comes from the symbol files of the pret disassemblies built to match these exact cartridges, and every name in the builder (items and Pokemon) from the same source code. Each code family and each list code was switched on in the game, used, and read back from the game's own memory and screen. Pokemon is made by Game Freak and published by Nintendo; GameShark is a trademark of its owner. GardenFlouer is a fan site and is not connected to either.