Cheat Sheets / Pokemon Gold and Silver

Cheat Sheets · GameShark codes

Pokemon Gold and Silver cheats

To cheat in Pokemon Gold or Silver, use GameShark codes: on a GameShark plugged in with the cartridge, or in an emulator's cheat menu. A code is eight characters, 01VVAAAA: 01, the value it writes, and the address with its low byte first, written again every frame. Gold and Silver share every address, so one code works in both.

GameShark code builder

Your code

Your save
Switched off
Tested

Crystal moved almost every value, so these codes do something else there: use the Crystal page.

Every code the builder makes, tested

Each family below was built from the game's own memory map (the address is a label in the game's code, never a number copied from a list), switched on in the game in an emulator, used the way a player would, then switched off to see what stays. The codes shown use the builder's starting values.

Any item in your Pack Tested

0120B8D5 0163B9D5

Your Pack holds RARE CANDY x99.

It stays when you switch the code off.

In the Items and Balls pockets, pick a slot that already has an item in it: a slot past the last one writes over the pocket's end marker, and the pocket then lists junk after it (tested with a list code that does this). TMs and HMs need no slot: each one has its own count.

Tested in Gold and Silver. What the run read:

  • RARE CANDY x99 in the ITEMS pocket
  • MASTER BALL x99 in the BALLS pocket
  • code off: both stay
Any item in your Pack: the real game screen with the code on
Pokemon Gold with the code on, in the emulator.

Money Tested

010F73D5 014274D5 013F75D5

Your money reads 999999. The game stores it as one number in 3 bytes, at most 999999.

It stays when you switch the code off.

Tested in Gold and Silver. What the run read:

  • money in RAM
  • 999999 on the Trainer Card
  • both badge bytes in RAM
  • code off: money and badges stay
Money: the real game screen with the code on
Pokemon Gold with the code on, in the emulator.

Any wild Pokemon Tested

0197EDD0 013240D0

Every wild Pokemon you meet is MEW at level 50.

Wild Pokemon are normal again at the next battle.

Catch it and it is a real MEW (tested with MEW, caught with a Master Ball). Switch the codes off before a trainer battle: the game builds a trainer's Pokemon from the same bytes (from the code; trainer battles were not tested).

Tested in Gold and Silver. What the run read:

  • the wild Pokemon is MEW
  • its level is 50
  • caught, and it is in the party with the codes off
Any wild Pokemon: the real game screen with the code on
Pokemon Gold with the code on, in the emulator.

Shiny wild Pokemon Tested

01AAF5D0 01AAF6D0

Every wild Pokemon is shiny: its DVs read Attack 10, Defense 10, Speed 10, Special 10, which is the game's own shiny rule.

Wild Pokemon roll their own DVs again at the next battle.

The Attack DV also decides a Pokemon's gender and, with the others, which Unown letter it is. Its stats come from its DVs too, so it is shiny with 10s in Defense, Speed and Special.

Tested in Gold and Silver. What the run read:

  • the wild Pokemon's DVs are the shiny ones
  • caught; the party copy keeps the shiny DVs with the codes off
Shiny wild Pokemon: the real game screen with the code on
Pokemon Gold with the code on, in the emulator.

Walk through walls Tested

0100A3CE 0100A4CE 0100A5CE 0100A6CE

You walk through trees, walls and onto water: the four codes tell the game the tiles around you are floor.

Walls are back after one more step: the game reads the tiles around you again after every step (tested).

Walking off a map where no route joins it takes you into places the game never drew.

Tested in Gold and Silver. What the run read:

  • code off: a step into the tree is blocked
  • code on: the step goes onto the tree
Walk through walls: the real game screen with the code on
Pokemon Gold with the code on, in the emulator.

No wild battles Tested

010579D1

No wild Pokemon from walking in grass, caves or water (tested in tall grass). The code holds the game's own wait after a battle (wWildEncounterCooldown) at 5 steps. Trainers still see you.

Wild battles come back at once.

Tested in Gold. What the run read:

  • no wild battle in 200 steps of tall grass
  • control (no code): wild battles happen in the same grass

Badges Tested

01FF7CD5 01FF7DD5

The badges you tick are yours, Johto and Kanto: the Trainer Card shows them.

They stay when you switch the code off.

Tested in Gold and Silver. What the run read:

  • money in RAM
  • 999999 on the Trainer Card
  • both badge bytes in RAM
  • code off: money and badges stay
Badges: the real game screen with the code on
Pokemon Gold with the code on, in the emulator.

Pokedex complete Tested

01FFE4DB 01FFE5DB 01FFE6DB ... 64 codes in all (the builder lists them)

All 251 Pokemon seen and caught. 64 codes: one for each byte of the two flag lists.

The flags stay when you switch the codes off, so you can enter them a few at a time if your GameShark holds fewer codes.

Tested in Gold and Silver. What the run read:

  • 251 seen and 251 caught flags while the Pokedex is open (the screen's numbers are in the picture)
  • code off: every caught flag stays
Pokedex complete: the real game screen with the code on
Pokemon Gold with the code on, in the emulator.

Infinite HP in battle Tested

01001CCB 01641DCB

Your Pokemon's HP in battle is set back to 100 every frame.

HP goes down normally again.

Use your Pokemon's max HP. A bigger number shows over the max and stays after the battle (tested with 255 over a max of 30).

Tested in Gold and Silver. What the run read:

  • HP stays at the max every turn
  • PP of move 2 stays 30 in battle and in the party

Infinite PP Tested

012314CB 012341DA

Move 1 keeps 35 PP, in battle and in your first Pokemon's own copy.

PP goes down normally again.

The game takes a PP from two places each turn. A code on the battle copy alone (as most lists print it) lets your Pokemon's own PP run down (tested).

Tested in Gold and Silver. What the run read:

  • HP stays at the max every turn
  • PP of move 2 stays 30 in battle and in the party

Game Corner coins Tested

01277AD5 010F7BD5

Your coins read 9999. Stored as one number in 2 bytes.

They stay when you switch the code off.

Tested in Gold and Silver. What the run read:

  • coins in RAM (9999 as one number)
  • code off: the coins stay

Codes from other lists, tested

The codes most Pokemon Gold and Silver code lists print, each switched on in the game and checked the same way. The address of every code was looked up in the game's own symbol files, so the verdict says what the code really writes to.

CodeLists call itVerdictWhat the game does
01FF7CD501FF7DD5All 16 badgesWorks$FF to wJohtoBadges and wKantoBadges. The same codes the builder makes.
019973D5019974D5019975D5Max moneyWorks, with a catchGold and Silver keep money as one number, not two digits a byte as Red did. 99 99 99 reads as 10,066,329, over the 999,999 cap, and the Trainer Card shows a broken digit and 66329. The builder's 010F73D5, 014274D5, 013F75D5 give 999,999.
0108A3CE0108A4CE0108A5CE0108A6CEWalk through wallsWorkswTileDown, wTileUp, wTileLeft and wTileRight set to $08, a collision type no map uses, which the game treats as land. You walk through trees. The builder writes $00, plain floor.
0197EDD0Wild Pokemon is Mew (01??EDD0: any Pokemon)WorkswTempEnemyMonSpecies, which the battle builds the wild Pokemon from. You meet Mew at the grass's own level. The same code the builder makes.
010719D1Shiny wild PokemonWorks, with a catchHolds wBattleType at 7, the type the Red Gyarados battle uses, for which the game sets the shiny DVs (EA AA, tested). It also takes the place of the type the game gives special battles, such as fishing and the Bug-Catching Contest; only grass battles were tested.
01000BD2No random battlesWorksHolds wPlayerTileCollision at $00: the game thinks you stand on floor, never tall grass. 200 steps in tall grass, no battle. Caves and water were not tested.
0120E2D5Infinite Rare CandyWorks, with a catchThe first slot of the Key Items pocket: RARE CANDY shows there with no number. With no key items it writes over the pocket's end marker, and the pocket lists ? entries after it.
0101E2D5Master BallWorks, with a catchSame slot: a MASTER BALL in the Key Items pocket, with the same junk after it in an empty pocket. The builder's Balls pocket codes put it where balls go.
010182D6Always on the bikeWorksHolds wPlayerState at 1, the bicycle.
01FF1DCBInfinite HPWorks, with a catchThe low byte of wBattleMonHP: HP 255 over your max (30 in our test), and the party keeps 255 after the battle. Type your max HP in the builder instead.
012814CBInfinite PP, move 1Works, with a catchThe battle's PP of move 1 reads 40; your Pokemon's own PP still drops (35 to 33 in two turns). The builder adds the second code.
01277AD5010F7BD59999 Game Corner coinsWorks$270F, 9999 as one number, in wCoins.
0163B9D5First item x99WorksThe quantity of the first slot of the Items pocket. The builder's second item code.
0120BAD5Item modifier, first item (01??BAD5)Does not work$D5BA is the SECOND slot's item byte. With one item in the pocket it lands on the end marker: RARE CANDY x0 shows second, with junk after it. The first slot's item is 01??B8D5.
010419D1Always meet female PokemonDoes not workIt holds wBattleType at 4, the fishing battle type. Gender comes from the Attack DV, which this never touches; the Pokemon in our test rolled its own DVs.
010519D1Always meet male PokemonNot testedNot run. It holds wBattleType at 5, the type the roaming Raikou and Entei battles use, which makes a battle read and write a roaming Pokemon's HP; gender is not involved.

How a GameShark code works

A Game Boy GameShark code is eight characters, TTVVLLHH. TT is the code type: 01 writes one byte; 9b first switches the Game Boy Color's work RAM to bank b; 8b first switches the cartridge's save RAM bank. VV is the byte it writes. LLHH is the address with its low byte first, so 010138CD writes 01 to address CD38.

The GameShark plugs in between the Game Boy and the cartridge and writes every code's byte again once a frame, about 60 times a second, from the game's VBlank interrupt. It only writes memory; it never changes the cartridge. So a code works when the game reads that byte for the thing you want, and it keeps working only while the game would not change it back. That is why some codes stay when you switch them off (your money really is 999999 now) and others stop at once (wild Pokemon are normal again).

How we tested: the game runs in an emulator with no change to its code, and before every frame our model of the GameShark writes the code's byte, the way the device does. For the codes whose timing could matter, a second emulator whose own GameShark writes at the exact moment the real device does gave the same result.

How to enter the codes

On a real GameShark

The GameShark sits between the Game Boy and the cartridge, and you enter codes on it before the game starts; it holds 10 to 25 codes at once. We did not test a real device.

In RetroArch

  1. Load the game and open the Quick Menu, then Cheats.
  2. Choose Add New Code to Top (or to Bottom), open the new line and pick Code.
  3. Type the code, set Enabled to on, go back one level and choose Apply Changes.

In Delta (iPhone and iPad)

  1. Start the game and open the pause menu, then Cheat Codes.
  2. Tap + and choose GameShark as the cheat device.
  3. Give it a name and type the code.

Other emulators have a cheat menu too; pick GameShark as the code type. These steps come from each emulator's own help pages. Codes with more than one line are entered as one cheat with one code per line, or as separate cheats that are all on.

Before you save

Items, money, coins, badges and Pokedex flags go into your save the next time you save the game, and switching the code off does not take them back. Wild Pokemon, walking through walls and no wild battles are never saved. If you want to be able to go back, copy your save file first (an emulator's save file, or a second save on a real cartridge is not possible: there is one). Caught Pokemon from a code are normal Pokemon and stay in your save.

Codes for glitch Pokemon and glitch items are left out of this page on purpose: they can damage a save in ways the game cannot repair.

Questions people ask

How do you cheat in Pokemon Gold and Silver?

With GameShark codes: on a GameShark plugged in with the cartridge, or in an emulator's cheat menu. Gold and Silver share every address, so one code works in both: 0120B8D5 with 0163B9D5 puts 99 Rare Candies in the first slot of your Items pocket.

What is the shiny code for Pokemon Gold and Silver?

01AAF5D0 with 01AAF6D0 makes every wild Pokemon shiny: they write the game's shiny DVs (Attack 10, Defense 10, Speed 10, Special 10). 010719D1, from other lists, works too: it sets the battle type the Red Gyarados uses, which the game always makes shiny.

What is the walk through walls code for Gold and Silver?

0100A3CE, 0100A4CE, 0100A5CE and 0100A6CE together: they tell the game the four tiles around you are floor. Walls come back one step after you switch them off.

What is the max money code for Gold and Silver?

010F73D5, 014274D5 and 013F75D5 give 999999. The 019973D5 set other lists print writes 99 99 99, which Gold and Silver read as 10,066,329, over the cap; the Trainer Card shows a broken digit.

How do you get a Master Ball in Gold and Silver?

0101FDD5 with 0163FED5 puts 99 Master Balls in the first slot of your Balls pocket (the builder makes it for any ball). The 0101E2D5 some lists print puts a Master Ball in the Key Items pocket instead.

Do Gold and Silver codes work in Crystal?

No. Crystal moved almost every value, so a Gold and Silver code writes something else there. Use the Crystal page.

How this was checked

Tested in the game's own code in an emulator, English Gold and Silver 1.0, on . Not on a real GameShark or cartridge. Every address comes from the symbol files of the pret disassemblies built to match these exact cartridges, and every name in the builder (items and Pokemon) from the same source code. Each code family and each list code was switched on in the game, used, and read back from the game's own memory and screen. Pokemon is made by Game Freak and published by Nintendo; GameShark is a trademark of its owner. GardenFlouer is a fan site and is not connected to either.