Styler Energy and line length
From the Pokemon Ranger Wiki · How it works · Pokemon Ranger (DS, 2006)
Styler Energy is how much line damage your Styler can take, 4 at level 1 up to 60 at level 20. The Line Length on the status screen (100 to 200) is only for show: the limit the game enforces is 39 to 53 steps of 11 pixels, a line of about 440 to 590 pixels.
The short version
- Styler Energy is how much damage your Styler can take: 4 at level 1, up to 60 at level 20. Source 1: From the game, the column Source 2: From the game, the numbers
- The line length limit is how long a line you can draw before its tail starts to vanish: 39 steps of 11 pixels at level 1, 53 at level 20 (43 percent of a hidden column, rounded down), a line of about 440 to 590 pixels. Source 1: From the game, the rule Source 3: From the game, the tail vanishing Source 4: Read in code, the 11-pixel step Source 2: From the game, the numbers
- The Line Length on the status screen (100 to 200) is for display only: nothing that runs the line reads it. Source 1: From the game, the copy Source 5: Read in code, its readers
Styler Energy
Your maximum energy is the level table's energy column plus a bonus saved with your file. Source 1: From the game A second, game-wide bonus is added too, but it is always 0. Source 5: Read in code Your energy stays between 0 and that maximum. Source 1: From the game Bulbapedia's Energy figures match all 20 levels. Source 6: Cross-checked
The gauge holds at most 90. Source 7: From the game It draws its value and maximum clamped to 0 to 90. Source 8: Read in code No level reaches 90, so the cap only matters for bonuses. Source 2: From the game unconfirmedSource 9: Best reading (unconfirmed)
A level up raises your maximum but does not refill your energy. Source 5: Read in code unconfirmedSource 10: Best reading (unconfirmed), in play
Energy comes back during a capture through an Electric Poke Assist, whose friend gives back one point every 10 frames, 5, 15 or 99 points by its power, never past the maximum (How Poke Assists work). Source 11: From the game, the refill unconfirmedSource 12: Best reading (unconfirmed), that it is Electric's friend
With no energy left, the Styler draws nothing: every touch of the screen is ignored. Source 3: From the game When energy runs out, one of a small stock of spare recoveries refills the Styler; with none left, the game goes to its failure path. Source 5: Read in code unconfirmedSource 13: Best reading (unconfirmed), the meaning The stock comes from your Ranger Rank and is 1 at every rank. Source 1: From the game, the column Source 14: From the game, the value unconfirmedSource 13: Best reading (unconfirmed), the meaning
Two line lengths
The game keeps two numbers for the line. Source 15: From the game
| Name on this wiki | Where it comes from | What it does |
|---|---|---|
| Line Length (shown) | level row +0x08, 100 to 200 | printed on the Styler status screen and in the level-up message |
| Line length limit (internal) | level row +0x06 x 43 / 100, rounded down, 39 to 53 | the length the game enforces while you draw, in steps of 11 pixels |
Source 1: From the game, the copies Source 5: Read in code, the screens that print it Source 2: From the game, the numbers
Past the limit, the start of your line vanishes as you draw: the game drops its oldest points. Source 3: From the game The limit counts the line's length in whole steps of 11 pixels, so a line can reach just under one more step than the limit: about 440 pixels at level 1 and 590 at level 20, roughly 1.7 to 2.3 times the width of the 256-pixel screen. Source 4: Read in code, the step unconfirmedSource 16: Best reading (unconfirmed), the arithmetic A line holds at most 128 points, one every 4 pixels of stylus travel. Source 3: From the game
The shown Line Length doubles from level 1 to level 20, but the enforced limit grows by only about a third, from 39 to 53. Source 2: From the game Bulbapedia gives the shown figure; you actually draw with the other. Source 6: Cross-checked
The 11-pixel step comes from the line's own set-up code, which is read but not yet rebuilt; earlier drafts of this page guessed 8 pixels, the size of a field unit. Source 4: Read in code The capture fields on this wiki trim the line at 11.
The Dark assist and the line
A Dark Poke Assist doubles the line length limit while it is active, to about 870 pixels at level 1 and 1,180 at level 20. Source 1: From the game, the doubling Source 4: Read in code, the pixels Every Dark Pokemon's assist stores a power of 2, and Dark's timer counts that power in frames, not seconds (one of few types that do), so a Dark assist started straight from it would last two frames. Source 17: From the game, the frames Source 18: Read in code, the start Source 19: From the game, the data
The best reading: a Dark assist runs 6 seconds of doubled line for each point of energy it spends. unconfirmedSource 20: Best reading (unconfirmed) Bulbapedia describes Dark as doubling the Capture Line for 6 seconds while it uses up a quarter of your energy. Source 21: Published source One routine in the code fits: a Pokemon in one state drains the Styler one point every 10 frames, a quarter of its energy at power 2, then starts an assist of its own type for 360 frames (6 seconds) per point taken. Source 18: Read in code
Timed modes
In timed modes each damage point costs 10 seconds of the clock instead of energy, and a no-damage break still costs 10 seconds. Source 7: From the game Which modes are timed is not traced yet; likely the Capture Arena and the Capture Challenges. unconfirmedSource 22: Best reading (unconfirmed)
Levels and EXP
Your Styler level rises as your EXP total reaches each level row's need: 100 EXP for level 2, up to 70,800 for level
- Source 1: From the game, the rule Source 2: From the game, the numbers Your Ranger Rank could cap the level, but every rank in the table
allows level 20, so it never holds you back. Source 1: From the game, the rule unconfirmedSource 23: Best reading (unconfirmed), the table The full table is on the Styler page.
Try it
Pick a Styler level
The bar compares this level's line length limit with level 20's. Source 24: Read in code, the 11-pixel step
How this is known
Each column was named by following it through the code: the energy column into the gauge's maximum, the 43 percent column into the line's limit, the 100 to 200 column only into the status screen. Those copies and the line trim are proven; the screens are read, not yet rebuilt.
See also
Sources
Numbers come from the game's own data on a US copy of Pokemon Ranger (DS, 2006), and rules from a decompilation of its code, unless a sentence names another source. Nothing is copied from another wiki.
A marker's shape shows how sure a fact is: From the game Read in code Cross-checked Best reading (unconfirmed) Published source. How this wiki is made
- From the game. Styler Energy, the line length limit, the shown Line Length, levels and EXP, the spare recoveries counter. The decompilation's findings:
styler-rank-stats.md(Player_RecomputeStylerStats, StylerLevel_GetLineLength, Capture_GetLineLengthLimit, Player_GetLevelRowForExp, Player_AddExp; func_020225a0, func_020893d8, func_ov002_021001a4 read only). Back to text: a b c d e f g h i j - From the game. The Styler level table (20 rows). The game's own data, read at build time from a US copy of the game. Back to text: a b c d e f
- From the game. The capture line's own frame: adding points, the length trim and its 11-pixel step (the constructor's divisor), the 128-point cap, no drawing at 0 energy. The decompilation's findings:
line-bosses.md(CaptureLine_Update, CaptureLine_AddPoint, CaptureLine_TrimToLimit, Capture_ReadStylus; the constructor func_02027860 read only). Back to text: a b c d - Read in code. Same as source 3. Back to text: a b c d
- Read in code. Same as source 1. Back to text: a b c d e
- Cross-checked. The Styler level table (20 rows). The game's own data, read at build time from a US copy of the game. Bulbapedia's Styler level figures (Energy and Line Length), matched 20 of 20 in v1. Bulbapedia. Back to text: a b
- From the game. The energy gauge and its limits. The decompilation's findings:
line-break-damage.md(StylerGauge_IncrementEnergy, StylerGauge_DecrementEnergy; display clamps read only). Back to text: a b - Read in code. The energy gauge and its limits. The decompilation's findings:
line-break-damage.md(StylerGauge_IncrementEnergy, StylerGauge_DecrementEnergy; display clamps read only). Pre-release review F6 (the 0 to 90 display clamps are read in code, not proven). The pre-release review of the decompilation. Back to text - Best reading (unconfirmed). Same as source 1. Back to text
- Best reading (unconfirmed) (in play). Same as source 1. Back to text
- From the game (the refill). The friend that refills the Styler during a capture (state 0x6f, answer 71). The decompilation's findings:
hit-test.md(Pokemon_HandleState6f). Back to text - Best reading (unconfirmed) (that it is Electric's friend). Same as source 11. Back to text
- Best reading (unconfirmed) (the meaning). Same as source 1. Back to text: a b
- From the game (the value). The Ranger Rank table (10 rows). The game's own data, read at build time from a US copy of the game. Back to text
- From the game. Decomp findings, answers 1 and 2. The decompilation's findings:
README.md. Back to text - Best reading (unconfirmed) (the arithmetic). Same as source 3. Back to text
- From the game (the frames). The Dark assist's timer, and the Pokemon state that drains energy into an assist. The decompilation's findings:
assist-timer.md(Assist_Start, Assist_TickType16; MapSnatch__v02 and func_02033ff8 read only). Back to text - Read in code. Same as source 17. Back to text: a b
- From the game (the data). The species table (Poke Assist type and power, kind 2 sub-record bytes 0x0c and 0x0d). The game's own data, read at build time from a US copy of the game. Back to text
- Best reading (unconfirmed). The Dark assist's timer, and the Pokemon state that drains energy into an assist. The decompilation's findings:
assist-timer.md(Assist_Start, Assist_TickType16; MapSnatch__v02 and func_02033ff8 read only). Bulbapedia, Poke Assist (the Pokemon Ranger table, the Dark row). Bulbapedia, read from a web.archive.org copy of 2026-08-02. archived copy Back to text - Published source. Bulbapedia, Poke Assist (the Pokemon Ranger table, the Dark row). Bulbapedia, read from a web.archive.org copy of 2026-08-02. archived copy Back to text
- Best reading (unconfirmed). Same as source 7. Back to text
- Best reading (unconfirmed) (the table). Styler Energy, the line length limit, the shown Line Length, levels and EXP, the spare recoveries counter. The decompilation's findings:
styler-rank-stats.md(Player_RecomputeStylerStats, StylerLevel_GetLineLength, Capture_GetLineLengthLimit, Player_GetLevelRowForExp, Player_AddExp; func_020225a0, func_020893d8, func_ov002_021001a4 read only). The Ranger Rank table (10 rows). The game's own data, read at build time from a US copy of the game. Back to text - Read in code (the 11-pixel step). The decompilation's reading of the game's code, not yet rebuilt and proven. Back to text
What changed and why
- The capture field now follows the decompiled game: Pokemon attack, every mover and every Poke Assist reaction runs as the game runs it, divers start under water, Steelix is built from its parts, and the line and the Styler disc are drawn exactly as the game draws them, 8 pixels thick. The pages that describe how Pokemon move and what each assist does were rewritten to match. Why: A review found the field not exact enough: no attacks, no real Styler sprite, the wrong line thickness, and water Pokemon showing their water layer all the time. The decompilation now covers all of it.
Your cartridge says otherwise? File a field report.
Every number here is read from the game, so the wiki is not crowd-edited. Each report is checked against the game's data and code. If you are right, the page is fixed, says what changed and why, and can thank you by name.
File a field reportYour Loopbook
Read to the end and this page joins your Loopbook, the list of what you have read on this device.
Open your Loopbook